DISTRIBUTION AMPLIFIERS       

    DDA-4010:   Single 1 In, 8 Out / Dual 1 In, 4 Out 3G/HD/SD/ASI
                       Reclocking/Non-Reclocking Distribution Amplifier.

              Switch selectable for single 1 in, 8 out or dual 1 in, 4 out distribution amplifier
                 operation.
              In-phase reclocked / non reclocked outputs on each amplifier.
              Selectable for either 3G/HD/SD-SDI or ASI applications.
              Automatic output muting on no input.
              Front panel monitoring outputs.
              Front panel indicators provide monitoring of presence of inputs and lock status.
              Automatic changeover to second input on loss of primary input (selectable).
              Optional relay bypass on loss of power.
              SNMP monitoring and control.

Brochure

User Manual

    IRT-6010-DDA:   openGear Single 1 In, 8 Out / Dual 1 In, 4 Out 3G/HD/SD/ASI
                             Reclocking/Non-Reclocking Distribution Amplifier.

              Switch selectable for single 1 in, 8 out or dual 1 in, 4 out distribution amplifier operation.
              In-phase reclocked / non reclocked outputs on each amplifier.
              Selectable for either 3G/HD/SD-SDI or ASI applications.
              Automatic output muting on no input.
              Front edge indicators provide monitoring of presence of inputs and lock status.
              Automatic changeover to second input on loss of primary input (selectable).
              Optional relay bypass on loss of power.
              DashBoard™ software monitoring and control.


Brochure

User Manual

AUDIO INSERTERS (Embedders)            

    DAI-4207:   3G/HD/SD-SDI Audio Inserter.

              Standard 75 Ohm 3G/HD/SD-SDI video input and outputs.
              Supports 3G and all HD & SD video line and frame rate standards.
              Inserts audio signals into 2 selectable groups.
              Eight high quality analogue audio inputs; or
              Four 110 Ohm balanced AES inputs, or optionally four 75 Ohm unbalanced AES inputs.
              20 bit and 24 bit audio supported.
              Z, C, U data preserved.
              Select between AES or Analogue audio inputs.
              48 kHz AES resampling.
              Ability to replace existing embedded audio.
              Indicators for presence of SDI & audio inputs.
              External alarm for loss of carrier.
              Selectable 3G, HD & SD SDI generator outputs colour black, blue green or yellow test
                 signal on loss of SDI input.
              Selectable tone generator inserts audio test signals within set audio groups.
              Cascadable - Two SDI outputs for connection to additional units.
              Simple Network Management Protocol (SNMP) capable.

Brochure

User Manual


AUDIO EXTRACTORS (De-Embedders)            

    DAX-4207:   3G/HD/SD-SDI Audio Extractor.

              Standard 75 Ohm 3G/HD/SD-SDI video input and outputs.
              Supports 3G and all HD & SD video line and frame rate standards.
              Extracts audio signals from 2 selectable groups.
              Eight high quality analogue audio outputs.
              Four 110 Ohm balanced AES outputs, or optionally four 75 Ohm unbalanced AES
                 outputs.
              Indicators for presence of SDI input type & audio within selected groups.
              External alarms for loss of carrier & audio.
              Selectable tone generator on audio outputs for audio test alignment signals.
              Cascadable - Two SDI outputs for connection to additional units.
              Simple Network Management Protocol (SNMP) capable.

Brochure

User Manual


FIBRE OPTICS       

    DTR-1000:   Multi-Channel 3G/HD/SD/ASI + Gigabit Ethernet Fibre Optic Link.

              Transports up to 16 independent 3G-SDI, HD-SDI, SD-SDI or ASI signal rates
                 plus a 1000/100/10Mb/s Ethernet signal on a single fibre.
              Path lengths up to 26 dB optical path loss using 9/125µm single mode fibre.
              DTR-1000 available as either 16 Tx; 16 Rx; 12 Tx + 4 Rx; 12 Rx + 4 Tx;
                 8 Tx + 8 Rx; 8 Rx + 8 Tx; 8 Tx; 8 Rx; 4 Tx + 4 Rx; or 4 Rx + 4 Tx models.
              Secondary DC supply inputs for power supply redundancy.
              Web Browser monitoring and control.

Brochure

User Manual

    DTR-4630:   3G/HD/SD-SDI/ASI Fibre Optic Transceiver.

              Transports 3G-SDI, HD-SDI, SD-SDI or ASI signal rates.
              Single or bi-directional operation possible with independent transmit and receive
                 functions on the one card.
              Path lengths up to 30 dB optical path loss using 9/125µm single mode fibre.
              LED indicators and external alarm contacts.
              Fibre, video and alarm connections at rear.
              Remote monitoring via SNMP.
              Optional on-board WDM optical combiner for use on a single common fibre.

Brochure

User Manual

    DDT-4630 & DDR-4630:   3G/HD/SD-SDI/ASI Fibre Optic Link.

              Transports 3G-SDI, HD-SDI, SD-SDI or ASI signal rates.
              Path lengths up to 30 dB optical path loss using 9/125µm single mode fibre.
              LED indicators and external alarm contacts.
              Fibre, video and alarm connections at rear.
              Automatic changeover switching of input for signal redundancy on Tx.
              Remote monitoring via SNMP.

Brochure

User Manual

    DDT-4632 & DDR-4632:   Dual 3G/HD/SD-SDI/ASI Fibre Optic Link.

              2 independent fibre links.
              Transports 3G-SDI, HD-SDI, SD-SDI or ASI signal rates.
              Path lengths up to 30 dB optical path loss using 9/125µm single mode fibre.
              LED indicators and external alarm contacts.
              Transmitter (Tx) and receiver (Rx) can be used separately with 2 independent
                 single channel fibre Rx and Tx cards.
              Remote monitoring via SNMP.
              Optional on-board WDM optical combiner for use on a single common fibre.

Brochure

User Manual

    DDT-4624 & DDR-4624:   Quad 3G/HD/SD-SDI/ASI Fibre Optic Link.

              4 independent fibre links.
              Transports 3G-SDI, HD-SDI or SD-SDI & ASI signals.
              Hot pluggable fibre connections.
              Various independent wavelength options available for use with a CWDM system.
              Transmitter (Tx) and receiver (Rx) can be used separately with 4 independent
                 single channel fibre Rx and Tx cards.

Brochure

User Manual

    DDT-4634 & DDR-4634:   Quad 3G/HD/SD-SDI/ASI Fibre Optic Link.

              4 independent fibre links.
              Transports 3G-SDI, HD-SDI or SD-SDI & ASI signals.
              Path lengths up to 30 dB optical path loss using 9/125?m single mode fibre.
              LED indicators and external alarm contacts.
              Transmitter (Tx) and receiver (Rx) can be used separately with 4 independent
                 single channel fibre Rx and Tx cards.
              Remote monitoring via SNMP.
              Optional on-board CWDM optical combiner for use on a single common fibre.

Brochure

User Manual

    OFP-4010:   Fibre Optic 2x2 Changeover Protection Switch.

              Automatic switching when optical level falls below a settable preset limit.
              External momentary Set/Reset control.
              No path change on power fail.
              Local or remote control.
              Front panel LED status indicators.
              Optional plug in SNMP monitoring and switching module.

Brochure

User Manual

    OFS-4020:   Optical Fibre Switcher.

              5 x 1 optical switcher.
              May be cascaded for expanded operation.
              Wideband operation 1260nm to 1620nm.
              Front panel local control.
              SNMP monitoring and control.

Brochure

User Manual

    IRT-6630-DTR:   openGear 3G/HD/SD-SDI/ASI Fibre Optic Transceiver.

              Transports 3G-SDI, HD-SDI, SD-SDI or ASI signal rates.
              Single or bi-directional operation possible with independent transmit and receive functions
                 on the one card.
              Path lengths up to 30 dB optical path loss using 9/125µm single mode fibre.
              Automatic changeover switching of input for signal redundancy on Tx.
              Optional on-board WDM optical combiner for use on a single common fibre.
              DashBoard™ and SNMP software monitoring and control.


Brochure

User Manual

    IRT-6630-DDT & IRT-6630-DDR:   openGear 3G/HD/SD-SDI/ASI Fibre Optic Link.

              Transports 3G-SDI, HD-SDI, SD-SDI or ASI signal rates.
              Path lengths up to 30 dB optical path loss using 9/125µm single mode fibre.
              Automatic changeover switching of input for signal redundancy on Tx.
              DashBoard™ and SNMP software monitoring and control.


Brochure

User Manual

    IRT-6632-DDT & IRT-6632-DDR:   openGear Dual 3G/HD/SD-SDI/ASI Fibre Optic Link.

              2 independent fibre links.
              Transports 3G-SDI, HD-SDI, SD-SDI or ASI signal rates.
              Transmitter (Tx) and receiver (Rx) can be used separately with 2 independent single
                 channel fibre Rx and Tx cards.
              Path lengths up to 30 dB optical path loss using 9/125µm single mode fibre.
              Optional on-board WDM optical combiner for use on a single common fibre.
              DashBoard™ and SNMP software monitoring and control.


Brochure

User Manual

    IRT-6638-DDT & IRT-6638-DDR:   openGear 8-Channel 3G/HD/SD-SDI/ASI Fibre Optic Link.

              Transports up to 8 independent 3G-SDI, HD-SDI, SD-SDI or ASI signal rates on a single
                 fibre via an on-board CWDM optical combiner.
              Path lengths up to 27 dB optical path loss using 9/125µm single mode fibre.
              Transmitter (Tx) and receiver (Rx) can be used separately with 8 independent
                 single channel fibre Rx and Tx cards via an external CWDM optical combiner.
              DashBoard™ and SNMP software monitoring and control.


Brochure

User Manual

    IRT-6690-DDT & IRT-6690-DDR:   openGear 8 Channel SD-SDI/ASI Fibre Optic Link.

              270 Mb/s type signals, such as ASI and SDI, capability.
              Automatic cable equalisation for up to 300m on each input.
              Optical path loss ≥ 27dB.
              DashBoard™ and SNMP software monitoring and control.


Brochure

User Manual


SWITCHERS       

    AMS-4172:   3G/HD/SD-SDI, ASI, G.703, Video, Audio Relay Changeover Switch.

              One video and two audio changeover switches in one package.
              Video path suitable for 3G/HD/SD-SDI, Analogue video, ASI,
                 G703 signals @ 2, 8, 34, 45, 144, 155 Mb/s, and unbalanced AES.
              Audio path suitable for 2 balanced, or 4 unbalanced, audio or data signals,
                 and balanced AES.
              Married or independent operation.
              Momentary Set/Reset control.
              No path change on power fail (or board removal - video only).
              Local or remote control.
              SNMP monitoring and control of module.

Brochure

User Manual

    DVS-4080:   3G/HD/SD-SDI / ASI Digital Video Switcher & Router.

              3G-SDI, HD-SDI, SD-SDI or ASI capable.
              8x1 or dual 4x1 switching operation.
              8x2 or 4x2 router setup.
              Automatic muting on loss of inputs.
              Front panel local control with remote control option.
              SNMP monitoring and control.

Brochure

User Manual

    IRT-6170-AMS:   openGear 3G/HD/SD-SDI, ASI, G.703, Video, Audio Relay Changeover Switch.

              One video and two audio changeover switches in one package.
              Video path suitable for 3G/HD/SD-SDI, Analogue Video, ASI, G.703 signals @ 2, 8, 34,
                 45, 144, 155 Mb/s, and unbalanced AES.
              Audio path suitable for 2 balanced, or 4 unbalanced, audio or data signals, and balanced
                 AES.
              Married or independent operation.
              Momentary Set/Reset control.
              No path change on power fail.
              Local or remote control.
              DashBoard™ software monitoring and control.


Brochure

User Manual

    IRT-6170-AVS:   openGear Dual 4x1 / Single 7x1 75Ω Relay Switcher.

              Dual 4 x 1 or single 7 x 1 relay switch.
              75 ohm unbalanced Inputs & Outputs.
              Latching relays.
              Optional Remote Control.
              DashBoard™ software monitoring and control.


Brochure

User Manual

    IRT-6080-DVS:   openGear 3G/HD/SD-SDI / ASI Digital Video Switcher & Router.

              3G-SDI, HD-SDI, SD-SDI or ASI capable.
              8x1 or dual 4x1 switching operation.
              8x2 or 4x2 router setup.
              Automatic muting on loss of inputs.
              Front edge local control with remote control option.
              DashBoard™ software monitoring and control.


Brochure

User Manual